ASTM Standards Source Metals Collection Type A

ASTM Standards Source Metals Collection Type A

TABLE OF CONTENTS

(Standards will be added, revised or withdrawn on an ongoing basis.)

 

A1-00 Standard Specification for Carbon Steel Tee Rails

A2-90(1997) Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types

A3-01 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)

A6/A6M-01 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

A20/A20M-01 Standard Specification for General Requirements for Steel Plates for Pressure Vessels

A21-94(1999) Standard Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use

A27/A27M-95(2000) Standard Specification for Steel Castings, Carbon, for General Application

A29/A29M-99e1 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements for

A31-00 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

A34/A34M-96 Standard Practice for Sampling and Procurement Testing of Magnetic Materials

A36/A36M-00a Standard Specification for Carbon Structural Steel

A47/A47M-99 Standard Specification for Ferritic Malleable Iron Castings

A48/A48M-00 Standard Specification for Gray Iron Castings

A49-01 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars

A53/A53M-01 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

A65-01 Standard Specification for Steel Track Spikes

A66-01 Standard Specification for Steel Screw Spikes

A67-00 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked

A74-98 Standard Specification for Cast Iron Soil Pipe and Fittings

 

A82-97ae1 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement

A90/A90M-01 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

A99-82(2000) Standard Specification for Ferromanganese

A100-93(2000) Standard Specification for Ferrosilicon

A101-93(2000) Standard Specification for Ferrochromium

A102-93(2000) Standard Specification for Ferrovanadium

A105/A105M-01 Standard Specification for Carbon Steel Forgings for Piping Applications

A106-99e1 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

A108-99 Standard Specification for Steel Bars, Carbon, Cold-Finished, Standard Quality

A109/A109M-00e1 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

A111-99a Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire

A116-00 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric

A121-99 Standard Specification for Zinc-Coated (Galvanized) Steel Barbed Wire

A123/A123M-01 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

A125-96 Standard Specification for Steel Springs, Helical, Heat-Treated

A126-95(2001) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

A128/A128M-93(1998) Standard Specification for Steel Castings, Austenitic Manganese

A131/A131M-94 Standard Specification for Structural Steel for Ships

A132-89(2000) Standard Specification for Ferromolybdenum

A134-96 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

 

A135-01 Standard Specification for Electric-Resistance-Welded Steel Pipe

A139-00 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

A143-74(1999) Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel 

Products and Procedure for Detecting Embrittlement

A146-64(2000) Standard Specification for Molybdenum Oxide Products

A148/A148M-01 Standard Specification for Steel Castings, High Strength, for Structural Purposes

A153/A153M-01 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

A159-83(2001) Standard Specification for Automotive Gray Iron Castings

A167-99 Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip

A176-99 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip

A178/A178M-95(2000) Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

A179/A179M-90a(1996)e1 Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

A181/A181M-01 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

A182/A182M-01 Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

A183-98 Standard Specification for Carbon Steel Track Bolts and Nuts

 

A184/A184M-01 Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement

A185-97 Standard Specification for Steel Welded Wire Fabric, Plain, for Concrete Reinforcement

A192/A192M-91(1996)e1 Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

A193/A193M-01a Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

A194/A194M-01 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both

A197/A197M-00 Standard Specification for Cupola Malleable Iron

A202/A202M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon

A203/A203M-97 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel

A204/A204M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

 

A209/A209M-98 Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

A210/A210M-96 Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

A213/A213M-01 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

A214/A214M-96 Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

A216/A216M-93(1998) Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature Service

A217/A217M-01 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure- Containing Parts, Suitable for High-Temperature Service

A220/A220M-99 Standard Specification for Pearlitic Malleable Iron

A225/A225M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel

A227/A227M-99 Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs

A228/A228M-00 Standard Specification for Steel Wire, Music Spring Quality

A229/A229M-99 Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs

A230/A230M-99 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality

 

A231/A231M-96 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire

A232/A232M-99 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire

A234/A234M-00a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

A239-95(1999) Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles

A240/A240M-01 Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels

A242/A242M-00a Standard Specification for High-Strength Low-Alloy Structural Steel

A247-67(1998) Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings

A249/A249M-01 Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

A250/A250M-95(2001) Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes

A252-98e1 Standard Specification for Welded and Seamless Steel Pipe Piles

A254-97 Standard Specification for Copper-Brazed Steel Tubing

A255-99 Standard Test Method for Determining Hardenability of Steel

A262-98 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

A263-94a(1999) Standard Specification for Corrosion-Resisting Chromium Steel-Clad Plate, Sheet, and Strip

 

 

A264-94a(1999) Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate, Sheet, and Strip

A265-94a(1999) Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate

A266/A266M-99 Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

A268/A268M-01 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

A269-01 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

A270-01 Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing

A275/A275M-98 Standard Test Method for Magnetic Particle Examination of Steel Forgings

A276-00a Standard Specification for Stainless Steel Bars and Shapes

A278-93 Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F

A283/A283M-00 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

A285/A285M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

 

A288-91(1998) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators

A289/A289M-97 Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

A290-95(1999) Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

A291-95(1999) Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

A295-98 Standard Specification for High-Carbon Anti-Friction Bearing Steel

A297/A297M-97(1998) Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

299/A299M-97e1 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon

A302/A302M-97e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

A304-96 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements

A307-00 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength

A308-99 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process

A309-01 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test

 

A311/A311M-95(2000) Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements

A312/A312M-00c Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes

A313/A313M-98 Standard Specification for Stainless Steel Spring Wire

A314-97 Standard Specification for Stainless Steel Billets and Bars for Forging

A319-71(2001) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts

A320/A320M-01 Standard Specification for Alloy/Steel Bolting Materials for Low-Temperature Service

A321-90(1995)e1 Standard Specification for Steel Bars, Carbon, Quenched and Tempered

A322-91(1996) Standard Specification for Steel Bars, Alloy, Standard Grades

A323-93(2000) Standard Specification for Ferroboron

A324-73(2000) Standard Specification for Ferrotitanium

A325M-00 Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric]

 

A325-00 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

A327M-91(1997) Standard Test Methods for Impact Testing of Cast Irons (Metric)

A327-91(1997) Standard Test Methods for Impact Testing of Cast Irons

A328/A328M-00 Standard Specification for Steel Sheet Piling

A331-95(2000) Standard Specification for Steel Bars, Alloy, Cold-Finished

A333/A333M-99 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service

A334/A334M-99 Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

A335/A335M-01 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

A336/A336M-99e1 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

A338-84(1998) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)

A340-99a Standard Terminology of Symbols and Definitions Relating to Magnetic Testing

A341/A341M-00 Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods

A342/A342M-99 Standard Test Methods for Permeability of Feebly Magnetic Materials

A343-97 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame

 

A345-98 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications

A348/A348M-00 Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame

A350/A350M-00c Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

A351/A351M-00 Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts

A352/A352M-93(1998) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

A353/A353M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered

A354-01 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

A355-89(2000) Standard Specification for Steel Bars, Alloys, for Nitriding

A356/A356M-98e1 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

A358/A358M-01 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service

A363-98 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand

A367-60(1999) Standard Test Methods of Chill Testing of Cast Iron

A368-95a(2000) Standard Specification for Stainless Steel Wire Strand

 

A369/A369M-01 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

A370-97a Standard Test Methods and Definitions for Mechanical Testing of Steel Products

A372/A372M-99 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

A376/A376M-01 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service

A377-99 Standard Index of Specifications for Ductile-Iron Pressure Pipe

A380-99e1 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

A384-76(1996) Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies

A385-00 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)

A387/A387M-99e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

A388/A388M-95(2001)e1 Standard Practice for Ultrasonic Examination of Heavy Steel Forgings

A389/A389M-93(1998) Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service

 

A390-95(2001) Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)

A391/A391M-98 Standard Specification for Grade 80 Alloy Steel Chain

A392-96 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

A394-00 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

A395/A395M-99 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

A400-69(2000) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties

A401/A401M-98 Standard Specification for Steel Wire, Chromium-Silicon Alloy

A403/A403M-00b Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

A407-93(1998) Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs

A409/A409M-01 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

A411-98 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire

A414/A414M-00 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels

A416/A416M-99 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

A417-93(1998) Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units

A418-99 Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings

 

A420/A420M-00b Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

A421/A421M-98a Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete

A423/A423M-95(2000) Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

A424-00 Standard Specification for Steel, Sheet, for Porcelain Enameling

A426-92(1997) Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

A427-74(1996)e1 Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction

A428/A428M-01 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles

A434-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered

A435/A435M-90(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

A436-84(1997)e1 Standard Specification for Austenitic Gray Iron Castings

A437/A437M-01 Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service

A438-80(1997) Standard Test Method for Transverse Testing of Gray Cast Iron

A439-83(1999) Standard Specification for Austenitic Ductile Iron Castings

A447/A447M-93(1998) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service

A449-00 Standard Specification for Quenched and Tempered Steel Bolts and Studs

A450/A450M-96a Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes

A451-93(1997) Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

A453/A453M-00 Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels

A455/A455M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese

A456/A456M-99 Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings

A459-97 Standard Specification for Zinc-Coated Flat Steel Armoring Tape

A460-94(1999) Standard Specification for Copper-Clad Steel Wire Strand

A463/A463M-01 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

A466/A466M-98 Standard Specification for Weldless Chain

A467/A467M-98 Standard Specification for Machine and Coil Chain

A469-94a(1999) Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors

A470-01 Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings For Turbine Rotors and Shafts

A471-94(1999) Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

A472-98 Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings

A473-01 Standard Specification for Stainless Steel Forgings

A474-98 Standard Specification for Aluminum-Coated Steel Wire Strand

A475-98 Standard Specification for Zinc-Coated Steel Wire Strand

A476/A476M-00 Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls

A478-97 Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire

A479/A479M-00 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

A480/A480M-01 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

A481-94(2000) Standard Specification for Chromium Metal

A482-93(2000) Standard Specification for Ferrochrome-Silicon

A483-64(2000) Standard Specification for Silicomanganese

A484/A484M-00 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

A485-00 Standard Specification for High Hardenability Antifriction Bearing Steel

A487/A487M-93(1998) Standard Specification for Steel Castings Suitable for Pressure Service

A488/A488M-01 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

A489-00 Standard Specification for Carbon Steel Lifting Eyes

A490M-00 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

A490-00 Standard Specification for Heat-Treated Steel Structural Bolts, 150 ksi Minimum Tensile Strength

A491-96 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

A492-95(2000) Standard Specification for Stainless Steel Rope Wire

A493-95(2000) Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging

A494/A494M-01 Standard Specification for Castings, Nickel and Nickel Alloy

A495-94(2000) Standard Specification for Calcium-Silicon Alloys

A496-97ae1 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement

A497-99e1 Standard Specification for Steel Welded Wire Fabric, Deformed, for Concrete Reinforcement

A498-98 Standard Specification for Seamless and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes with Integral Fins

A499-89(1997)e1 Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails

 

A500-01 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

A501-01 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

A503/A503M-01 Standard Specification for Ultrasonic Examination of Large Forged Crankshafts

A504-93(1999) Standard Specification for Wrought Carbon Steel Wheels

A505-00 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

A506-00 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

A507-00 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

A508/A508M-95(1999) Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

A510M-00 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]

A510-00 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel

A511-96 Standard Specification for Seamless Stainless Steel Mechanical Tubing

A512-96 Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

A513-00 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

A514/A514M-00a Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

A515/A515M-92(1997) Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

A516/A516M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

A517/A517M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

A518/A518M-99 Standard Specification for Corrosion-Resistant High-Silicon Iron Castings

A519-96 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

A522/A522M-95b(2001) Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service

A523-96 Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits

A524-96 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

A529/A529M-00 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

A530/A530M-99e1 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

A531/A531M-91(1996) Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings

A532/A532M-93a(1999)e1 Standard Specification for Abrasion-Resistant Cast Irons

A533/A533M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

A534-94 Standard Specification for Carburizing Steels for Anti-Friction Bearings

A536-84(1999)e1 Standard Specification for Ductile Iron Castings

A537/A537M-95(2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

A540/A540M-00 Standard Specification for Alloy-Steel Bolting Materials for Special Applications

A541/A541M-95(1999) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components

A542/A542M-99e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

A543/A543M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum

A550-78(2000) Standard Specification for Ferrocolumbium

A551-94(1999) Standard Specification for Steel Tires

A553/A553M-95(2000) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel

A554-98e1 Standard Specification for Welded Stainless Steel Mechanical Tubing

A555/A555M-97 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

A560/A560M-93(1998) Standard Specification for Castings, Chromium-Nickel Alloy

A561-71(1999) Standard Recommended Practice for Macrotech Testing of Tool Steel Bars

A562/A562M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings

A563M-00 Standard Specification for Carbon and Alloy Steel Nuts [Metric]

A563-00 Standard Specification for Carbon and Alloy Steel Nuts

A564/A564M-01 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

A565-97 Standard Specification for Martensitic Stainless Steel Bars, Forgings, and Forging Stock for High-Temperature Service

A568/A568M-00b Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

A571M-84(1997) Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service [Metric]

A571-84(1997) Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service

A572/A572M-00a Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

A573/A573M-00a Standard Specification for Structural Carbon Steel Plates of Improved Toughness

A574M-00 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]

A574-00 Standard Specification for Alloy Steel Socket-Head Cap Screws

A575-96 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades

A576-90b(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality

A577/A577M-90(2001) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates

A578/A578M-96(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications

A579-99 Standard Specification for Superstrength Alloy Steel Forgings

A580/A580M-98 Standard Specification for Stainless Steel Wire

A581/A581M-95b(2000) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods

A582/A582M-95b(2000) Standard Specification for Free-Machining Stainless Steel Bars

A583-93(1999) Standard Specification for Cast Steel Wheels for Railway Service

A584-97 Standard Specification for Aluminum-Coated Steel Woven Wire Fence Fabric

A585-97 Standard Specification for Aluminum-Coated Steel Barbed Wire

A586-98 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-Coated Wire for Spun-In-Place Structural Strand

A588/A588M-00a Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100 mm] Thick

A591/A591M-98 Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications

A592/A592M-89(1999) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels

A596/A596M-95(1999) Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens

A597-87(1999) Standard Specification for Cast Tool Steel

A598-92(1997) Standard Test Method for Magnetic Properties Of Magnetic Amplifier Cores

A599/A599M-99 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet

A600-92a(1999) Standard Specification for Tool Steel High Speed

A601-96(2000) Standard Specification for Electrolytic Manganese Metal

A602-94(1998) Standard Specification for Automotive Malleable Iron Castings

A603-98 Standard Specification for Zinc-Coated Steel Structural Wire Rope

A604-93(1998) Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

A606-98 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

A608-91a(1998) Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

A609/A609M-91(1997) Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof

A610-79(2000) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size

A612/A612M-00 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service

A615/A615M-01a Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement

A618-01 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

A623M-00 Standard Specification for Tin Mill Products, General Requirements [Metric]

A623-00 Standard Specification for Tin Mill Products, General Requirements

A624/A624M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced

A626/A626M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced

A627-95 Standard Specification for Homogeneous Tool-Resisting Steel Bars for Security Applications

A629-88(1994)e1 Standard Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications

A630-98 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate

A632-01 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

A633/A633M-00a Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

A635/A635M-00 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled

A636-76(2000) Standard Specification for Nickel Oxide Sinter

A638/A638M-00 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

A640-97 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable

A641/A641M-98 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire

A644-98 Standard Terminology Relating to Iron Castings

A645/A645M-99a Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated

A646-95(1999) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings

A648-95(2000) Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe

A649/A649M-99 Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

A650/A650M-98 Standard Specification for Tin Mill Products, Black Plate, Double Reduced

A653/A653M-01 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

A656/A656M-00a Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

A657/A657M-98a Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced

A659/A659M-97 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

A662/A662M-99 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

A663/A663M-89(2000) Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties

A664-99 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications

A666-00 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

A667/A667M-87(1998) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders

A668/A668M-96e1 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

A673/A673M-95 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

A674-00 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids

A675/A675M-90a(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties

A677/A677M-99 Standard Specification for Nonoriented Electrical Steel Fully Processed Types

A678/A678M-00a Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates

A679/A679M-00 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn

A681-94(1999) Standard Specification for Tool Steels Alloy

A682/A682M-00 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For

A683/A683M-99 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types

A684/A684M-86(1998) Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

A686-92(1999) Standard Specification for Tool Steel, Carbon

A688/A688M-01 Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes

A689-97 Standard Specification for Carbon and Alloy Steel Bars for Springs

A690/A690M-00a Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments

A691-98 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures

A693-93(1999) Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

A694/A694M-00 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service

A695-90b(1995)e1 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, for Fluid Power Applications

A696-90a(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components

A697-98 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods

A698/A698M-92(1997)e1 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields

A700-99e1 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment

A701-96(2000) Standard Specification for Ferromanganese-Silicon

A702-89(2000) Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought

A703/A703M-01 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

A704/A704M-96 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

A705/A705M-95(2000) Standard Specification for Age-Hardening Stainless Steel Forgings

A706/A706M-01 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

A707/A707M-00a Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service

A709/A709M-01 Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges

A710/A710M-00 Standard Specification for Age-Hardening Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates

A711-92(1996)e1 Standard Specification for Steel Forging Stock

A712-97 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys

A713-93(1998) Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components

A716-99 Standard Specification for Ductile Iron Culvert Pipe

A717/A717M-95 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens

A719-97 Standard Test Method for Lamination Factor of Magnetic Materials

A720-97 Standard Test Method for Ductility of Nonoriented Electrical Steel

A721-97 Standard Test Method for Ductility of Oriented Electrical Steel

A722/A722M-98 Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete

A723/A723M-94(1999) Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

A724/A724M-99 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels

A726-00 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types

A727/A727M-00 Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness

A729-93(1999) Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service

A730-93(1999) Standard Specification for Forgings, Carbon and Alloy Steel, for Railway Use

A732/A732M-98 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures

A733-99 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

A734/A734M-87a(1997) Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered

A735/A735M-99 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service

A736/A736M-88(2000) Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel

A737/A737M-99 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel

A738/A738M-00 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

A739-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both

A740-98 Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)

A741-98 Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail

A742/A742M-98 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe

A743/A743M-98ae1 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

A744/A744M-00 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

A745/A745M-94(1999) Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings

A746-99 Standard Specification for Ductile Iron Gravity Sewer Pipe

A747/A747M-99 Standard Specification for Steel Castings, Stainless, Precipitation Hardening

A748/A748M-87(1998) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use

A749/A749M-97 Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

A750-77(1994)e1 Standard Specification for Steel Air Ventilating Grille Units for Detention Areas

A751-96 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

A752M-93(1998) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]

A752-93(1998) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel

A753-97 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)

A754/A754M-96(2000) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence

A755/A755M-99 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

A756-94(2001) Standard Specification for Stainless Anti-Friction Bearing Steel

A757/A757M-00 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service

A758/A758M-00 Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

A759-00 Standard Specification for Carbon Steel Crane Rails

A760/A760M-01 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains

A761/A761M-98 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

A762/A762M-00 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains

A763-93(1999)e1 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

A764-95(2001) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

A765/A765M-98a Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

A767/A767M-00b Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

A768-95 Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts

A769/A769M-00 Standard Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes

A770/A770M-86(2001) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

A771/A771M-95(2001) Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components

A772/A772M-00 Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current

A773/A773M-96 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs

A774/A774M-00 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

A775/A775M-01 Standard Specification for Epoxy-Coated Reinforcing Steel Bars

A778-01 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

A779/A779M-00 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete

A780-01 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings

A781/A781M-00 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

A782/A782M-90(2001) Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel

A786/A786M-00b Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

A788-98a Standard Specification for Steel Forgings, General Requirements

A789/A789M-01 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

A790/A790M-01 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

A792/A792M-01 Standard Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

A793-96 Standard Specification for Rolled Floor Plate, Stainless Steel

A794-97 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled

A795-00 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

A796/A796M-00 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications

A798/A798M-01 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications

A799/A799M-92(1997) Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content

A800/A800M-01 Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof

A801/A801M-99 Standard Specification for Iron-Cobalt High Magnetic Saturation Alloys UNS R30005 and K92650

A802/A802M-95(2001) Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination

A803/A803M-01 Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes

A804/A804M-99 Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens

A805-93(1998) Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled

A807/A807M-97 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications

A808/A808M-00a Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness

A809-98 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

A810-01 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh

A811-97 Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques

A813/A813M-01 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

A814/A814M-01 Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

A815/A815M-01 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

A817-00 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

A818-91(2001) Standard Specification for Coppered Carbon Steel Wire

A820-96 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

A821/A821M-99 Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks

A822-90(2000) Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service

A823-99 Standard Specification for Statically Cast Permanent Mold Gray Iron Castings

A824-01 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

A826/A826M-95(2001) Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components

A829/A829M-00 Standard Specification for Alloy Structural Steel Plates

A830/A830M-00 Standard Specification for Plastes, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

A831/A831M-95(2000) Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components

A832/A832M-99e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium

A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

A834-95(2001) Standard Specification for Common Requirements for Iron Castings for General Industrial Use

A835-84(2000) Standard Specification for Sizes of Ferroalloys and Alloy Additives

A836/A836M-95b(2001) Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service

A837-91(1996)e1 Standard Specification for Steel Forgings, Alloy, for Carburizing Applications

A838/A838M-97 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloys for Relay Applications

A839/A839M-96 Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications

A840/A840M-00 Standard Specification for Fully Processed Magnetic Lamination Steel

A841/A841M-01 Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)

A842-85(1997) Standard Specification for Compacted Graphite Iron Castings

A844/A844M-93(1999) Standard Specification for Steel Plates, 9% Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process

A845-85(2000) Standard Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel

A846-85(2000) Standard Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel

A847-99a Standard Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

A848/A848M-96 Standard Specification for Low-Carbon Magnetic Iron

A849-00 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe

A851-96 Standard Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes

A852/A852M-00a Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick

A853-93(1998) Standard Specification for Steel Wire, Carbon, for General Use

A854/A854M-98 Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire

A855/A855M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand

A856/A856M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

A857/A857M-00a Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

A858/A858M-00 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service

A859/A859M-95(1999) Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

A860/A860M-00 Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings

A861-94e1 Standard Specification for High-Silicon Iron Pipe and Fittings

A862/A862M-98 Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe

A865-97 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints

A866-94 Standard Specification for Medium Carbon Anti-Friction Bearing Steel

A867/A867M-94(1998)e1 Standard Specification for Iron-Silicon Relay Steels

A871/A871M-00a Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

A872-91(1997) Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

A874/A874M-98 Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service

A875/A875M-01 Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process

A876/A876M-98 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types

A877/A877M-99 Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality

A878/A878M-99 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality

A879-00 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

A880-95 Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys

A881/A881M-99 Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties

A882/A882M-96e1 Standard Specification for Epoxy-Coated Seven-Wire Prestressing Steel Strand

A883-96 Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials

A884/A884M-01 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement

A885/A885M-96 Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe

A886/A886M-99 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

A887-89(2000) Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application

A888-98e1 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

A889/A889M-93(1998) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame

A890/A890M-99 Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

A891-98 Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

A892-88(2001) Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels

A893-97 Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies

A894/A894M-00 Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials

A895-89(2000) Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip

A896-89(1999) Standard Practice for Conducting Case Studies on Galvanized Structures

A897M-90(1997) Standard Specification for Austempered Ductile Iron Castings [Metric]

A897-90(1997) Standard Specification for Austempered Ductile Iron Castings

A898/A898M-91(1996) Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

A899-91(1996) Standard Specification for Steel Wire, Epoxy-Coated

A900-91(1996)e1 Standard Test Method for Lamination Factor of Amorphous Magnetic Strip

A901-97 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types

A902-99 Standard Terminology Relating to Metallic Coated Steel Products

A903/A903M-99 Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection

A904-98 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Alloys

A905-93(1998) Standard Specification for Steel Wire, Pressure Vessel Winding

A906/A906M-99 Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting

A908-91(1998) Standard Specification for Stainless Steel Needle Tubing

A909-94(1999) Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

A910/A910M-99 Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete

A911/A911M-99 Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties

A912-93(1998) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens

A913/A913M-00a Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)

A914/A914M-92(1999) Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements

A915/A915M-93(1998) Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades

A917-00 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)

A918-00 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

A920/A920M-97 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties

A921/A921M-93(1999) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging

A922-93(2000) Standard Specification for Silicon Metal

A923-98 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels

A924/A924M-99 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

A925-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand

A926-97 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe

A927/A927M-99 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method

A928/A928M-00 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal

A929/A929M-01 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe

A930-99 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

A931-96 Standard Test Method for Tension Testing of Wire Ropes and Strand

A932/A932M-95 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens

A933/A933M-95(2001) Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement

A934/A934M-01 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

A937-95 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces

A941-00a Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

A942-95(2001) Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells

A943/A943M-01 Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

A944-99 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

A945/A945M-00 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

A946-95(2000) Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service

A947M-95(2000) Standard Specification for Textured Stainless Steel Sheet [Metric]

A949/A949M-01 Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe

A950/A950M-99 Standard Specification for Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

A951-00 Standard Specification for Masonry Joint Reinforcement

A952/A952M-98 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links

A953-96 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing

A954-96 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe

A955/A955M-01 Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement

A956-00 Standard Test Method for Leeb Hardness Testing of Steel Products

A957-96 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

A958-00 Standard Specification for Steel Castings, Carbon, and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

A959-00a Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

A960-00 Standard Specification for Common Requirements for Wrought Steel Piping Fittings

A961-01 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

A962/A962M-01 Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range

A965/A965M-01 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

A966/A966M-96 Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current

A967-99e1 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

A968-96 Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service

A972/A972M-00 Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles

A973/A973M-00 Standard Specification for Grade 100 Alloy Steel Chain

A978/A978M-97 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications

A979/A979M-97 Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field

A981-97 Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors

A982-00 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils

A984/A984M-00 Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded

A985-98a Standard Specification for Steel Investment Casting General Requirements, for Pressure-Containing Parts

A988-98 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

A989-98 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

A990-00 Standard Specification for Chastings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosion Service

A991/A991M-98 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

A992/A992M-00 Standard Specification for Steel for Structural Shapes For Use in Building Framing

A993-98 Standard Test Method for Dynamic Tear Testing of Cast Irons to Establish Transition Temperature

A994-98 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

A996/A996M-01 Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

A999/A999M-01 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

A1000-99 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality

A1002-99 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy

A1005/A1005M-00e1 Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded

A1006/A1006M-00 Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded

A1007-00 Standard Specification for Carbon Steel Wire for Wire Rope

A1008-01 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability

A1010-01 Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip

A1011-01 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability

A1012-00 Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins

A1013-00 Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method

A1014-00 Standard Specification for Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service

A1015-01 Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications

A1016/A1016M-01 Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

A1017/A1017M-01 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten

A1018/A1018M-01 Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon, Structural, High-Strength Low-Alloy, Columbium or Vanadium, and High-Strength Low-Alloy with Improved Formability